RMC10 Small Format Robotic Milling Systems

Cell Dimensions

	SAE	Metric
Length	84"	2,134 mm
Width	60"	1,524 mm
Height (no riser)	84"	2,134 mm

Working Envelope

	SAE	Metric
Max part diameter (rotary)	48"	1,219 mm
Max part height (rotary)	48"	1,219 mm

Approved Materials

• Foam, Clay, Ice
• Sand, Plastic, Wax
• Soft wood (some), Composite, Ceramic
• Plaster, Cork

Cutting Speeds and Feeds

Speeds and feeds vary by material, depth, step-over, tooling, finish quality, and more. Values below assume lightweight foam at ½” LOC cut depth.

	SAE	Metric
Roughing	600 in/min	15,000 mm/min
Finishing	200 in/min	5,000 mm/min

Robot Arm

	SAE	Metric
Number of axes	6 (arm) + 1 (rotary)
Max payload	22 lbs	10 kg
Max reach	43"	1,100 mm
Repeatability	± 0.002"	± 0.05 mm
Protection rating	IP 64
Ambient temperature	50 – 130 °F	10 – 40 °C
Sound level	< 75 dB

Spindle

	SAE	Metric
Horsepower	5 HP
Max RPM	24,000
Cooling	Electric fan
Taper	ISO 20
Collet	ER 16
Max collet size	1/2"	12 mm
Max tool weight	5 lbs	2 kg

Tool Garage

Standard configuration holds 5 tools. Custom setups available upon request.

	SAE	Metric
Capacity	5
Max tool diameter (full)	2"	50 mm

Tool Setter

	SAE	Metric
Repeatability	0.002"	0.05 mm

Requirements

	SAE	Metric
Power	240 VAC, 1- or 3-phase, 30A
Air	6 SCFM, 80 PSI
Recommended floor thickness	6" (not required)	152 mm